基于波动负荷功率分析的闪变源判别方法
打开文本图片集
摘 要：通过建立多闪变源电路等效模型，分析了闪变功率闪变源判别原理，构建了改进能量算子提取电压和电流闪变包络，采用改进FFT谱分析获得闪变包络参数计算闪变功率，基于闪变功率方向和幅值特性实现闪变源定位及其污染评估，提出并建立了基于波动负荷功率分析的闪变源判别方法.仿真分析和实验表明，提出方法能快速有效定位闪变源，准确评估多闪变源的污染程度，判别结果快速准确、误判率低.
关键词：闪变源；闪变功率；改进能量算子；改进FFT；电能质量
中图分类号：TM835.4 文献标识码：A
Abstract： Through the establishment of multi-flicker sources circuit equivalent model， the theoretical background of tracing flicker sources by flicker power was analyzed. To accurately estimate flicker power， the flicker envelope parameters were obtained by using improved Teager-Kaiser energy operator and the improved FFT. The direction of flicker flow was determined by the sign of flicker power， and pollution assessment was achieved with the magnitude of flicker power. The simulation analysis and experiment results show that this approach can trace flicker sources effectively and rapidly and assess the pollution level of different flicker sources accurately. The tracing results are computed fast and correctly and the misdiagnosis rate is reduced.
Key words：flicker source；flicker power；improved energy operator；improved FFT；power quality
电压闪变是电能质量的重要参数，是导致电气设备故障与失效的重要原因[1].随着大功率波动负荷（如电弧炉、轧钢机等）的广泛应用，电网电压波动和闪变问题越来越严重.现有研究主要集中在电压闪变值的检测和计算方面，针对闪变源定位和闪变污染评估研究较少，而快速有效定位闪变源，明确闪变污染责任方，且在多闪变源情况下准确评估各闪变源污染程度，可为实现闪变问题针对性...
|
== 试读已结束，如需继续阅读敬请充值会员 ==
|
|
本站文章均为原创投稿，仅供下载参考，付费用户可查看完整且有格式内容！
(费用标准：38元/2月，98元/2年，微信支付秒开通！) |
| 升级为会员即可查阅全文 。如需要查阅全文，请 免费注册 或 登录会员 |
|
