烟末尺寸对造纸法再造烟叶性能的影响
摘要：采用Wiley粉碎机对烟末进行粉碎，提取不同尺寸的烟末与烟梗、针叶木浆混合采用造纸法制备再造烟叶，研究了烟末尺寸对再造烟叶质量的影响。结果表明，与混合磨浆方式相比，当添加60～120目的烟末浆时，烟草基片的各项物理性能较好，在抗张强度几乎不变的前提下，松厚度与柔软性分别提升了6.28%、23.03%。随着烟末尺寸减少，烟草基片的抗张强度逐渐提高，透气性和浆料滤水速率先提高后降低，松厚度、柔软性、单程留着率均逐渐降低。
关键词：再造烟叶；烟末浆；松厚度
中图分类号：TS74
文献标识码：A
DOI：10.11980/j.issn.0254-508X.2018.05.007
Abstract：The tobacco scrap was breaked by Wiley mill，the breached scrap with various sizes mix with softwood pulp fibers to make reconstituted tobacco sheet，the effect of scrap size on the physical properties of reconstituted tobacco sheet was investigated. The results showed that the reconstituted tobacco sheet had better physical properties with adding 60～120 mesh tobacco scrap pulp.Compared with the pulping processes of mixing softwood pulp and tobacco scrap， the bulk and softness of the sheet increased by 6.28% and 23.03%， respectively.While the tensile strength was almost unchanged. With the reduction of particle size of pulverized tobacco scrap， the tensile strength of reconstituted tobacco sheet gradually increased， permeability if the sheet and drainage rate of the stick increased firstly then decreased， but bulk， softness and first pass retention decreased gradually. Moreover， the results of smoking test of the reconstituted tobacco prepared by new process that the woody odor and stimulation reduced， the quality was improved obviously compared with the normal reconstituted tobacco sheet.
Key words：reconstituted tobacco sheet； scrap pulp； bulk
造紙法再造烟叶的生产工艺主要为两步，第一步是先将烟草原料使用一定温度的清水进...
|
== 试读已结束，如需继续阅读敬请充值会员 ==
|
|
本站文章均为原创投稿，仅供下载参考，付费用户可查看完整且有格式内容！
(费用标准：38元/2月，98元/2年，微信支付秒开通！) |
| 升级为会员即可查阅全文 。如需要查阅全文，请 免费注册 或 登录会员 |
|
